- Joined
- Jan 12, 2019
- Messages
- 18
This series is developing quite nicely, I think the most interesting part will be how Ookami acts now, Inaba isn't pulling any punches. Thanks for the translation.
Otonari Voice Chat - Vol. 2 Ch. 12
- Thread starter MangaDex
- Start date
Group Leader
- Joined
- May 1, 2020
- Messages
- 82
Hahaha, Inaba-san has a lot of cheering fans. Good luck, Inaba-san!! 
D
Can't stop my feelings getting mixed up when reading this chapter (while cleaning and redrawing it).
@triforce @MiniTaurus @kenh @ieatass69
Actually I've never repasted my laptop for almost three years since I purchased it. It's D*ll G7 15 - 7588, with 8750h and 1050 Ti configuration.
Normally under load it would be around 95 for the CPU (already throttling horribly) and 88 for the GPU. Anyway, I undervolted it both, so either will always be below 80 degree celcius under load. The performance falls, though I don't really mind most of the time.
But since you guys really recommends cleaning the internals and repasting, I will try to do that (I've ordered Arct*c MX-4). I'm kinda scared though, my laptop internals got a lot of screws (like a LOT) and complex build, way different than my previous L*novo laptop---wish me luck so I won't brick my laptop. ( ；∀；)
I appreciate the suggestions. Thank you very much!!!!! m(_ _)m
DCan't stop my feelings getting mixed up when reading this chapter (while cleaning and redrawing it).
@triforce @MiniTaurus @kenh @ieatass69
Actually I've never repasted my laptop for almost three years since I purchased it. It's D*ll G7 15 - 7588, with 8750h and 1050 Ti configuration.
Normally under load it would be around 95 for the CPU (already throttling horribly) and 88 for the GPU. Anyway, I undervolted it both, so either will always be below 80 degree celcius under load. The performance falls, though I don't really mind most of the time.
But since you guys really recommends cleaning the internals and repasting, I will try to do that (I've ordered Arct*c MX-4). I'm kinda scared though, my laptop internals got a lot of screws (like a LOT) and complex build, way different than my previous L*novo laptop---wish me luck so I won't brick my laptop. ( ；∀；)
I appreciate the suggestions. Thank you very much!!!!! m(_ _)m
Dex-chan lover
- Joined
- May 18, 2019
- Messages
- 3,747
The first time you disassemble a new laptop model will always be the worst, especially if you have never done so for a few years (expect a few stubborn screws). Usually I just do it and everything works out somehow. Just don't try to bruteforce a screw if it really refuses to move. Don't be an idiot like my friend, trying to unscrew the thing so hard that he ended up with 3 motherboard screws completely stripped of their slots.
Group Leader
- Joined
- May 1, 2020
- Messages
- 82
@ieatass69
This is not my first time, but yeah, the last time I opened electronics and fixing them was quite a long time ago. I hope this will work out fine.
Thank you for your suggestion, I will definitely make note not to brute force a screw... in the past I stripped a screw once, and it was hell. But I managed to pull it out using rubber band in the end, luckily.
Thank you so much!!
This is not my first time, but yeah, the last time I opened electronics and fixing them was quite a long time ago. I hope this will work out fine.
Thank you for your suggestion, I will definitely make note not to brute force a screw... in the past I stripped a screw once, and it was hell. But I managed to pull it out using rubber band in the end, luckily.
Thank you so much!!
Similar threads
