- Joined
- Jul 15, 2019
- Messages
- 7,946
told you it was peak![]()
HAPPY LUCKY CHAPPY OITE IKANAIDEEEEE
HAPPY LUCKY CHAPPY OITE IKANAIDE
told you it was peak![]()
HAPPY LUCKY CHAPPY OITE IKANAIDEEEEE
HAPPY LUCKY CHAPPY OITE IKANAIDE
Nicotine will suffice. Better get that black cig stuff.Another 12h shift and ain't got no food and running low on tobacco
I'm fucking hungry
wtf is a mangadex?
Is it? But it's still 2019. For me it's endless.
Might as well get bootlegs intentionally on AliExpress or so.Searching for figures on Amazon and Ebay can be impossible at times with the amount of bootlegs. While some of them have obvious tells, others may look pretty legit until you get them off the card and they fall apart.
...you have piqued my interest - details, please....I couldn't find anywhere to get basic piezo crystals for an improved version of my project, alas
I can't divulge too much, but in short, it's a device that gets the position it is in via ultrasonic, that's timed by with a different signal that tells the other device to start counting....you have piqued my interest - details, please....
Yeah, ultrasonic tends to be straight line only, and it gets worse as you climb the spectrum - take all the problems speaker designers have with axis width for tweeters and multiply several times. (Currently running a stack of records through my ultrasonic cleaners, which use 40kHz as well, coincidentally - I'm thinking that must be a fairly standard part.)I currently use 40khz transceivers, but they are a bit too directional for my purposes.
Rather than that, my Idea is to simply use more piezo crystals at increasing angles, kinda like having a disco ball on the front of the device.Yeah, ultrasonic tends to be straight line only, and it gets worse as you climb the spectrum - take all the problems speaker designers have with axis width for tweeters and multiply several times. (Currently running a stack of records through my ultrasonic cleaners, which use 40kHz as well, coincidentally - I'm thinking that must be a fairly standard part.)
Can you drop down to 20-25 kHz, and use a more conventional tweeter/supertweeter driver? Those may give you more spread on the initial dispersal pattern.
Use an aggregator to catch up to the most recent chapterI want to read CSM but Mangaplus keeps deleting chapters so I forgot which chapter I was on.